Yilmaz Reduktor T Series

TT Series reducers are helical geared, two-stage motorless, hole-shaft reducers produced according to the monoblock body principle. Thanks to the monoblock body structure, the body axes are machined in a single operation, ensuring high manufacturing precision. In the T-Series reducers, which are only two stages, the gear placements are optimized to minimize the body volume. Thus, it has been possible to deliver high torque values ​​in a smaller volume. The body cast from GG20 cast iron material and high quality ground and hardened cementation steel gears are manufactured by keeping them under constant control under the quality control system. Thanks to the hole in the TT Series reducers and its compact body structure, it can be mounted in areas with smaller volumes. It can be mounted on the body. It is mounted on the machine with the torque arm connection holes provided. TT series, which are produced without an engine, are generally driven by belt and pulley mechanisms. Therefore, when selecting the reducer, the choice should be made according to the reducer input speed and the radial load value that will occur on the input shaft should be checked according to the allowed radial load values ​​​​given in the catalogue.

Features and Advantages

• Monoblock body design,
• 10 different sizes,
• 200-18000Nm torque range,
• Torque arm connection possibility,
• GG20-GG22 cast iron body,
• Possibility of using mechanical locks,
• Ability to use in different mounting positions.

Additional Solutions and Accessories

• Mechanical lock,
• Tightening disc,
• Torque arm,
• Special seal solutions,
• Transparent oil level indicator.

TT..00Series

 

Motorless, through-shaft reducer group

< div>