230 V Drivon:

• Single-phase and three-phase power supply: (200÷260) V / (47÷63) Hz
• Rated power: 0.25; 0.37; 0.55; 0.75; 1.1; 1.5 kW
• Speed range: 0÷2500 rpm

400V Drivon:

• Three-phase power supply: (360÷480) V / (47÷63) Hz
• Rated power: 0.25; 0.37; 0.55; 0.75; 1.1; 1.5; 2.2; 3.0; 4.0; 5.5 kW
• Speed range: 0÷3000 rpm

General functions:

• FOC open-loop vectorial control of asynchronous motors
• Protection class: IP55 (IP56, IP65, IP66 optional)
• Built-in STO (Safe Torque Off) feature for safe stop according to ISO 13849-1 and IEC 61508 standards
• On-board potentiometer with Start function featuring programmable threshold
• Built-in USB interface
• Integrated CANopen DSP402 and Modbus RTU field Bus
• Continuous duty at low speed with reduced use of servo-ventilation
• Torque overload of 200% at transient rpm
• Motor I2t thermal cut-out
• PTC and bimetallic thermal probe input
• Multi-colour status LED for quick diagnosis
• Programmable multifunction opto-isolated digital inputs
• Maximum drive torque can be set by the user
• Possible speed setting by means of the encoder on motor
• Enable auto search for idling motor speed at starting
• Combinatorial multiple frequency reference
• Dynamic braking with emergency fast stop
• External process PI regulator with analogue feedback
• S-ramps with programmable parameters
• Mechanical resonance frequency controlled management
• Control and programming smart keypad (optional)
• Potentiometer + movement direction control module (optional)
• Profibus DP communication module (optional)
• Electro-mechanic braking module (optional)
• I/O expansion module (optional)
• Dynamic braking module with integrated resistor (optional)

SMART KEYPAD (optional):

• Integrated in the inverter or remote-type
• Mechanical fixing with possibility to set its orientation
• Remote control by means of a cable and RJ connection
• Parameter setting and Control functions
• 7-segment 4-digit display
• UP/DOWN/ENTER/MODE/FWD_REV buttons
• Parameter Copy function
• JOG function